Welcome to Shandong Tengyi Metal Materials Co., Ltd.
ER316L
Application: Used for the petrochemical engineering and chemical ferilizer equipmentt etc.Such as the welding of materials e.g.022Cr19Ni12Mo2(S316L)etc.
Characteristics: This welding wire is ultra-low carbon 19%Cr-12%Ni-2%Mo type stainless steel welding wire with a good corrosion resistance to acetic acid,sulphurous acid, phosphoric acid and salts due to no Mo.It has a stable welding arc and beautiful formation, available for the all-positioning welding.
Chemical Composition Of Welding Wire:(Mass Fraction)
| Item | C | Mn | Si | Cr | Ni | Mo | P | S | Cu |
| Guarantee Value | ≤0.030 | 1.00 -2.50 | ≤0.65 | 18.00 -20.00 | 11.00 -14.00 | 2.00 -3.00 | ≤0.030 | ≤0.030 | ≤0.75 |
| Typical Value | 0.023 | 1.82 | 0.42 | 19.08 | 12.59 | 2.52 | 0.009 | 0.008 | 0.26 |
Mechanical Property of Deposited Metal
| Item | Tensile Strength Rm/MPa | Elongation A% |
| Guarantee Value | ≥510 | ≥25 |
| Typical Value | 600 | 41 |
Note On Usage:
1.MIG welding shield gas flow should be between 18-25L/min;The shield gas should apply Ar+2%O₂;If the wind speed is greater than 0.5m/s,it is required to take the wind-proof measures.
2.TIG welding shield gas flow requirement:If the welding current is between(15-200)A, the gas flow should be(5-14)L/min;If the welding current is between(200-320)A,the gas flow should be(14-24)L/min.The shield gas should apply pure Ar,and please take the wind-proof measures is the wind speed is greater than 1.0m/s;It is required to remove the impurities e.g. rust,oil contaminant,water etc.on welding workpiece prior to MIG/TIG welding;The above- mentioned welding parameters should be for reference only,users should develop the welding standards appropriate for the production according to their own specific conditions.
RELATED PRODUCTS
GET A FREE QUOTE
To inquire about our products, please leave your email to us and we will contact you within 24 hours.